Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Heavy Duty Supplies

Sludge Judge for Sampling & Settled Solids

$89.99

Sludge Judge for Sampling & Settled Solids

$89.99
SKU:
C09247WA
Share

Product Description

Sludge Judge Sampler Complete 15'

Sludge Judge is for taking accurate reading at any depth in a variety of liqueds when noncaustic materials are needed. The sludge Judge is ideal for sewage treatment plants, chemical plants, and food processing facilities. The Sludge Judge® holds approximately 3 oz. per foot (89 ml per 0.31 m). The Sludge Judge® comes in 5 ft. sections of 3/4" plastic pipe with screw-type connectors. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165° F. Sludge Judge® is not autoclavable.

Slowly lower the Sludge Judge® to the bottom of the tank. The float valve opens (see figure A), allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised. This sets the check valve(see figure B), trapping the mixture inside. sludge-judge-a-open-sj.jpg

When the unit has been raised clear of the liquid, the amount of solids in the sample can be read using the 1 ft. (0.31 m) increments marked on the pipe sections. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample. One-year warranty.

 sludge-judge-b-closed.jpg

Warranty Information

Product Reviews

Find Similar Products by Category